KUPA MANIPro Passport NEXT

The NEXT is the newer model. It adds a digital LED screen that shows your exact speed (RPM) and battery level, plus a pause button and a forward and reverse switch. The battery also lasts longer, about 10 to 12 hours. The original KUPA MANIPro Passport does not have the LED screen or these controls.

One full charge lasts about 10 to 12 hours of use. A full charge takes about 2 hours with the quick-charge dock.

Yes. You can keep working while the drill sits in its charging dock, so you do not have to stop during a busy day. Note that the dock charges the drill whenever it is docked — there is no way to use the dock as a stand without charging.

Bits are not included. The set has the handpiece, control box, charging dock, belt clip, holster, and manual. The chuck accepts standard 3/32" shank bits only — if your current bits have a 3/32" shank they will fit, but larger 1/8" shank bits will not.

It reaches up to 30,000 RPM with high torque, so it is strong enough for acrylic prep and removal. You can also lower the speed for gentle work, like cuticles or buffing off gel polish.

It comes with the KP-65 handpiece, which is made in Japan. The handpiece is light and runs quietly with very little vibration. If you ever need a spare, the KP-65 is also sold on its own.

It is a professional tool, not a basic starter, but the features that help most when you are learning are here. You can set an exact low speed on the LED screen and work slowly with light pressure, which is the safest way to learn. The forward and reverse switch lets you file both sides of the nail safely, and the low vibration keeps the handpiece easy to control. Two things to keep in mind: bits are sold separately, so you will need to add beginner-friendly bits, and no drill replaces good technique — start slow and learn the basics before working on clients.

A few small things come up from techs who use it daily. There is a brief delay when you start the drill or change speed — it is slight, but noticeable if you are used to an instant dial. The speed adjusts in steps and does not go below the lowest setting on the screen, so if you prefer ultra-slow speeds for delicate work, plan to use a light touch instead. And when you return the handpiece to the dock, lower it in gently — dropping it in carelessly can scratch the finish over time. None of these are dealbreakers, but we would rather you know before you buy.

KUPA covers the MANIPro Passport NEXT with a two-year limited warranty on parts and labor.

Yes. The power supply switches automatically between 110V and 220V, so it works in most countries. You may only need a simple plug-shape adapter.